DuroStat SMT Conductive & Dissipative ESD Vinyl Tile:

Optimum ESD / Static Control Protection

Construction

DuroStat SMT ESD control vinyl tile and GZ C-2000 conductive adhesive are components of a precision engineered system of advanced static control flooring. Available in SC (static-conductive) and SD (static-dissipative) our tiles contain proprietary encapsulated conductive elements distributed evenly throughout the tile to provide exceptional , electrically consistent, through-tile-to-ground charge decay. Unlike other ESD Tiles these encapsulated conductive elements retain their conductivity for life while providing the electrical assurance you can count on in the most demanding of environments

ITEMSTANDARD TEST METHODASTM SPECCONDUCTIVE TILESTATIC DISSIPATIVE TILE

ELECTRICAL / ELECTROSTATIC PROPERTIES

Electrical Resistance
-Surface to Surface

-Surface to Ground

ESD S 7.1 (100V)
ASTM F-150 (100V)
NFPA 99 (500V)
DIN 51953 (500V)
2.5 X 104~106 Ω
(SD: 106~109)

2.5 X 104~106

 

106~108
<2.5 X 104~
<2.5 X 104~
 Electrostatic Propensity
(=Static Generation)
ESD STM 97.2
–
Less than 20 volts
Less than 20 volts
 Static DecayFederal Test Method 101B Method 4046 at 15% Relative Humidity
 < 0.5 sec
 0.01 sec
0.01 sec

OTHER PROPERTIES

CEN ClassificationDIN EN 685
Class 34 + 43
Composition of MaterialASTM F 1700
Certificate of Compliance
Homogeneous
ThicknessASTM F 386, DIN EN 428
as specified ±0.005 in. (0.13mm)
.118″, 3mm
Nominal SizesASTM F 536, DIN EN 427
±0.016 in./lin. Ft (0.4mm/304.8 mm)
12″ x 12″
SquarenessASTM F 540
maximum 0.010 in. (0.25 mm)
<0.010″
Residual IndentationASTM F1914
DIN EN 433
average less than 8%,
max. single reading 10%
< 7%
FlexibilityASTM F 137
no crack or break
No crack or break
Dimensional StabilityASTM Fed. Std. No. 501a
Method 6211, DIN EN 434
<0.020″/ft (0.51 mm/304.8 mm)
<0.015″/ft
Resistance to ChemicalsASTM F 925
DIN EN 423
No more than a slight change in surface dulling, surface attack or staining
no more than a slight change in surface dulling, surface attack, or staining
Resistance to HeatASTM F 1514
∆<8 ave., max
<∆E=2.0
Resistance to LightASTM F 1515
∆E<8 ave., max
<∆E=6.0
Static Load LimitModified ASTM F 970-00
–
2,500 psi
Smoke DensityASTM E 662
<450
<450
Flame SpreadASTM E 84, NFPA 225
<75
<75
Fire ResistanceDIN 4102
B1
Critical Radiant FluxASTM E 648, NFPA 253
>1.08 W/cm2(class I Interior Floor Finish, NFPA Life Safety code 101)
  Abrasion ResistanceASTM D 1044,
CS-10-F Wheel,
500Gm Weight
Cycle
10,000
% Gauge Loss
1.60
Resistance to WearDIN EN 660-1
M
Effect of Castor ChairDIN EN 425
No Damage
 Color FastnessISO 105 B02
At least 6
Standard for Health Care FacultiesNFPA 99
Confirms to the requirements of NFPA 99 in effect at the time of installation
Fulfils product requirementsDIN EN 649
yes
Underwriters LaboratoriesUL 779
Meets UL Standard

WARRANTY

Free from defects in Workmanship and materials*
Ten Years
Conductivity*
Lifetime